Emergency Salvage of Flood Damaged Family Papers

By: www.archives.gov/preservation/conservation/flood-damage.html
water damage cleanup, water damage removal, basement water removal
Article by: Pillyburds
Shared by: Elite Water Damage
Like us on FaceBook
Call us Today 1-855-354-8383!!

more blogs by us

MOLD

Many people are sensitive to mold. Also, some mold species are toxic. If any health effects are observed when treating mold consult a doctor or mycologist (the local extension service may be able to help) before proceeding.

The best way to prevent or stop an outbreak of mold is to remove items from environmental conditions that encourage mold growth: high temperature, high relative humidity, stagnant air, and darkness. The first priority is to dry moldy items (see instructions for drying below). If wet and moldy materials cannot be dried immediately they may be stabilized by freezing. Placing damaged items in a personal or commercial freezer will not kill mold. It will, however, put the mold in a dormant state until time and an appropriate treatment environment are available. Manageable quantities of frozen items may then be defrosted and treated at leisure.

Active mold looks fuzzy or slimy. Dormant mold is dry and powdery. Do not attempt to remove active mold; it may only spread or smear. Mold which remains active after freezing or after the host material appears dry may be treated with brief (1-2 hours) exposure to ultraviolet radiation from the sun. Extreme caution must be exercised when treating materials outdoors: too much radiation will accelerate deterioration and may cause fading; wind may cause physical damage if items are blown about; and high relative humidity or condensation caused by quick temperature changes may actually exacerbate mold growth.

Dormant mold spores will reactivate as soon as conditions are favorable. They should, therefore, be removed from items and may be brushed or vacuumed away. This treatment should be performed outdoors where other materials and spaces will not be "infected." When brushing mold use a soft, clean, light-colored brush and a gentle pushing motion. Change soiled brushes often to prevent spreading mold from one object to another. When vacuuming, screening material placed over the nozzle of a low suction vacuum will capture loose bits of the item which may inadvertently dislodge.

CLEANING AND DRYING

Paper is very fragile when it is wet. Handle it carefully. In some cases it may be desirable to remove caked on mud and dirt. Dirt left by receding flood waters may be contaminated. Precautions such as the use of rubber gloves should be taken. If items are still wet, agitating them in a bath of clear water will remove excess dirt. This treatment should never be attempted for images which are blurred, feathered, or faded as a result of flood damage.

AIR DRYING

Wet books, documents, or photographs which cannot be air dried within two days should be frozen to inhibit mold growth. Circulating air will effectively dry most items. Physical distortions may result, but document information will be saved. To provide optimal air drying conditions, fans should be positioned for maximum air circulation (do not aim air flow directly at drying materials). Blotting material for air drying should be clean and absorbent. Options include: blotter paper, unprinted newsprint paper, paper towels, rags, mattress pads, etc. Screening material (such as window screens) well supported and stacked with space between them provide an excellent compact drying surface. The porous surface assists air circulation and promotes drying.

Without intervention glossy materials such as paperback book covers, magazines, art books, etc. are likely to stick together. If they are highly valued, these items should be the first priority for salvage. Loose glossy materials should be spread out in one layer for air drying. Bound glossy materials must be interleaved between every page to prevent sticking. Wax paper should be used as interleaving material. Volumes of glossy paper dried in this way may suffer considerable physical distortion.

MOLD BASICS

Article by:phillyBurbs
Shared by: Elite Water Damage
Like us on FaceBook
more blogs by us
Call us Today 1-855-354-8383!!

Why is mold growing in my home?

Mold growing outdoors on firewood.

Molds come in many colors; both white and black molds are shown here. Click on the image for larger version.

Molds are part of the natural environment.  Outdoors, molds play a part in nature by breaking down dead organic matter such as fallen leaves and dead trees, but indoors, mold growth should be avoided.  Molds reproduce by means of tiny spores; the spores are invisible to the naked eye and float through outdoor and indoor air.  Mold may begin growing indoors when mold spores land on surfaces that are wet.  There are many types of mold, and none of them will grow without water or moisture.

Can mold cause health problems?

Molds are usually not a problem indoors, unless mold spores land on a wet or damp spot and begin growing.  Molds have the potential to cause health problems. Molds produce allergens (substances that can cause allergic reactions), irritants, and in some cases, potentially toxic substances (mycotoxins).  Inhaling or touching mold or mold spores may cause allergic reactions in sensitive individuals.  Allergic responses include hay fever-type symptoms, such as sneezing, runny nose, red eyes, and skin rash (dermatitis). Allergic reactions to mold are common.  They can be immediate or delayed.  Molds can also cause asthma attacks in people with asthma who are allergic to mold. In addition, mold exposure can irritate the eyes, skin, nose, throat, and lungs of both mold-allergic and non-allergic people.  Symptoms other than the allergic and irritant types are not commonly reported as a result of inhaling mold.  Research on mold and health effects is ongoing.  This brochure provides a brief overview; it does not describe all potential health effects related to mold exposure. For more detailed information consult a health professional.  You may also wish to consult your state or local health department.

How do I get rid of mold?

Magnified mold spores

Molds gradually destroy the things they grow on. You can prevent damage to your home and furnishings, save money, and avoid potential health problems by controlling moisture and eliminating mold growth

It is impossible to get rid of all mold and mold spores indoors; some mold spores will be found floating through the air and in house dust.  The mold spores will not grow if moisture is not present.  Indoor mold growth can and should be prevented or controlled by controlling moisture indoors.  If there is mold growth in your home, you must clean up the mold and fix the water problem.  If you clean up the mold, but don't fix the water problem, then, most likely, the mold problem will come back.